Home incubators Temperature/humidity /Illumination PWS

Temperature/humidity /Illumination PWS

Temperature/humidity /Illumination PWS

  • Parameters can be entered manually by pressing up and down key, the setting is simple and convenient, LED display of set and measured parameters
  • With independent overtemperature protection device, reliability and safety of products can be improved.
  • With convenient temperature (humidity) compensation function, deviation of displayed temperature (humidity) value from actual measured value is effectively avoided.
  • Use mirror stainless steel inner case, four corners of semi-circle can be easily cleaned, spacing of shelves in the box is adjustable.
  • Equipped with larger rectangular observation window to observe the status of samples.
  • Digital display of intensity of illumination and intensity of illumination can be manually adjusted.

Standard Configuration

Model PWS150 PWS250
Circulation method Forced air circulation
Control  System Balanced temperature & humidity control system(BTHC)
Temp.range 10~65℃
Temp.accuracy ±0.5℃
Temp.uniformity ≤2℃
Humid. uniformity ≤±5%
Illuminance 4500±500LUX
Control method Microcomputer Control
Digital setting method Digital setting by key
Digital display method Digital display by LED
Sensor PT100 Ω
Exterior Material Electrostatic spraying of epoxy powder on cold-rolled steel sheet
Interior Material Stainless steel plate SUS304
Heat insulating material Glass wool
Sealing of door Environment-friendly silicone rubber strip
Heater Iron-chrome wire heater
Humidifier Stainless steel tube heater
Safe Device
Independent overtemp. prevention, breaker with overcurrent protection
Inside dimensions (mm) D 450 450 450 450
W 500 600 500 600
H 650 900 650 900
Outside dimensions (mm) D 818 818 818 818
W 620 720 620 720
H 1300 1550 1300 1550
Internal capacity 150L 250L 150L 250L
Power 1KW 1.5KW 2.3KW 2.5KW
Power Supply 220V /50HZ
Shelf plate, 2 sets/Product description, 1 set
Optional Accessories
Additional shelf plate

  • The performance shown here is the value under the condition of the ambient temperature of 23∞C±2∞C, humidity of 65%RH±20%. And there is not burden.
  • The projection is not included for Internal dimensions and External dimensions.