Home incubators low temperature incubator PSH

low temperature incubator PSH


low temperature incubator PSH



  • Parameters can be entered manually by pressing up and down key, the setting is simple and convenient, LED display of set and measured parameters.
  • With independent overtemperature protection device, reliability and safety of products can be improved.
  • With convenient temperature (humidity) compensation function, deviation of displayed temperature (humidity) value from actual measured value is effectively avoided.
  • Use mirror stainless steel inner case, four corners of semi-circle can be easily cleaned; shelf spacing in the box is adjustable.
  • Equipped with larger rectangular observation window to observe the status of samples.
Features:

Standard Configuration

Model PSH150 PSH250
Performance
Circulation method Forced air circulation
Control  System Balanced Temperature Control system (BTC)
Temp.range 4~50℃
Temp.accuracy ±0.5℃
Temp.uniformity ≤2℃
Controller
Control mode Microcomputer Control
Digital setting method Digital setting by key
Digital display method Digital display by LED
Sensor PT100 Ω
Components
Exterior Material Electrostatic spraying of epoxy powder on cold-rolled steel sheet
Interior Material SUS304 Stainless steel plate SUS304
Heat insulating material Glass wool
Sealing of door Magnetic sealing strip
Observation window Rectangular hollow glass
Heater Iron-chrome wire heater
Safe Device
Independent overtemp. prevention, breaker with overcurrent protection
Standard
Internal dimensions(mm) D 450 450 450 450
W 500 600 500 600
H 650 900 650 900
External dimensions(mm) D 818 818 818 818
W 620 720 620 720
H 1300 1550 1300 1550
Internal capacity 150 250 150 250
Power 0.8 KW 1 KW 2.5 KW 3.5 KW
Power Supply 220V   50HZ
Accessories
Shelf plate, 2 sets/Product description, 1 set
Optional Accessories
Additional shelf plate


  • The performance shown here is the value under the condition of the ambient temperature of 23∞C±2∞C, humidity of 65%RH±20%. And there is not burden.
  • The projection is not included for Internal dimensions and External dimensions.
 
 
 
яндекс.ћетрика