Features:
This testing machine is mainly used kinds of metal and alloy material testing in creeping performance and lasting performance under high temperature .It’s the special instrument for steel and metallurgy,aerospace aviation, scientific research institutes, colleges, Quality Inspection Center and commodities Inspection etc. to test and research materials.
- This testing machine don’t only achieve general creep testing,but also can accomplish cycle load,cycle control-temperature and so on.
- Using panosonic servo motor and high accuracy ball wire loading ,it is operated simiplily,maintenant easily and has low rate falults.
- The machine adopts EDC all-digital controller which has kinds of controlling functions such as force controlling,deformation controlling,speed controlling and so on.Its control accuracy is high,and the force value is right.
- It adopts imported transducer ,so it measures accurately and is reliable.
- The machine has manual unload function when the power supply is shut down,at the same time can automaticly unload function when power is started.
- The control system consisting of 485 lines realizes function that one computer controls several testing machine.
| Mode |
PRC-X030 |
PRC-X050 |
PRC-X100 |
| Maximum load（KN） |
30 |
50 |
100 |
| Load measurment range |
0.4%---100%F.S |
| Load range |
±1.0%(±0.5%) |
| bar journey |
200mm |
| Bar speed range |
0.01--200mm/min |
| Speed accuracy |
±1.0%(±0.5%) |
| Deformation measurment range |
settled according to user's demand |
| Deformation accuracy |
±1.0%(±0.5%) |
| Concentricity between up and down collect |
≤10% |
| Power |
0.75 |
0.75 |
1.5 |
| High temperature furnace form |
divided atmosphere furnace |
| Temperature range |
200℃---1100℃ |
| Soaking zone length |
≥150mm |
| Temperature-control accuracy |
temperature range |
temperature wave |
temperature grads |
| 200--600℃ |
±2℃ |
±2℃ |
| 600--900℃ |
±3℃ |
±3℃ |
| 900--1100℃ |
±4℃ |
±4℃ |
|
Testing machinies 
