Home incubators illumination incubator PGZ

illumination incubator PGZ

illumination incubator PGZ

  • Parameters can be entered manually by pressing up and down key, the setting is simple and convenient, LED display of set and measured parameters
  • With independent overtemperature protection device, reliability and safety of products can be improved.
  • With convenient temperature (humidity) compensation function, deviation of displayed temperature (humidity) value from actual measured value is effectively avoided.
  • Use mirror stainless steel inner case, four corners of semi-circle can be easily cleaned, spacing of shelves in the box is adjustable.
  • Equipped with larger rectangular observation window to observe the status of samples.
  • Digital display of intensity of illumination and intensity of illumination can be manually adjusted.

Standard Configuration

Model PGZ150 PGZ250
Circulation method Forced air circulation
Control  System Balanced Temperature Control system (BTC)
Temp.range 10~65℃
Temp.accuracy ±0.5℃
Temp.uniformity 2℃
Illuminance 3000~6000 LUX
Control method Microcomputer Control
Digital setting method Digital setting by key
Digital display method Digital display by LED
Sensor PT100 Ω
Exterior Material Electrostatic spraying of epoxy powder on cold-rolled steel sheet
Interior Material Stainless steel plate SUS304
Heat insulating material Glass wool
Sealing of door Environment-friendly silicone rubber strip
Heater Iron-chrome wire heater
Humidifier Stainless steel tube heater
Safe Device
Independent overtemp. prevention, breaker with overcurrent protection
Inside dimensions (mm) D 450 450 450 450
W 500 600 500 600
H 650 900 650 900
Outside dimensions (mm) D 818 818 818 818
W 620 720 620 720
H 1300 1550 1300 1550
Internal capacity 150L 250L 150L 250L
Power 1KW 1.5KW 2.3KW 2.5KW
Power Supply 220V /50HZ
Shelf plate, 2 sets/Product description, 1 set
Optional Accessories
Additional shelf plate

  • The performance shown here is the value under the condition of the ambient temperature of 23∞C±2∞C, humidity of 65%RH±20%. And there is not burden.
  • The projection is not included for Internal dimensions and External dimensions.