Features:
- Menu operation, easy and convenient, large LCD display
- Key or touch type screen operation
- Automatic hardness conversion
- Large capacity rechargeable battery
- Attached printer can be used to print out testing result
- Automatic recognition for the type of impact device
- Automatic detecting the impacting direction
- The setup can be be saved automatically
- Dual-operation both by keys or touch screen
- Automatic storage for 800 groups of testing data
Application range:
- For testing on large and heavy workpieces or installed permanent parts
- For testing in narrow and small spaces where it is not easy to test for bench type hardness testers
- It’s suitable to determine the Leeb hardness of ferrous and non-ferrous metals precisely.
- It features high applicability and is widely used in producing workshop for quality control.
Characteristics:
- Measuring accuracy: ± 4 HLD
- Hardness repeatability: ± 4 HLD
- Measuring range: 170～960 HLD
- Testing direction: arbitrary
- Hardness conversion: HRC, HRB, HB, HV, HSD & tensile strength
- LCD display: 3.9" LCD, 240 x 320 pixels resolution (touch screen)
- Data storage: 800 groups
- Upper & lower limit range: same as measuring range
- Working voltage: 3.7V (lithium rechargeable battery)
- Working time: 4-8 hours
- Charging power: DC 5.5V/1A
- Continuous working time after one charging: about 30 hours (backlight not on)
- Working temperature: 0°C ～+50°C
- Working humidity: 20%～85%
- Storage temperature: -30 °C ～+70 °C
- Storage humidity: 5%～95%
- Dimensions: 180 x 90 x 30mm
- Weight: 350g (including impact device)
- Packing dimensions: 368 x 247 x 87mm
- Total weight: Approx. 5.5Kg
- Heatsensitive printer:
- Width of print paper: 57.5± 0.5mm
- Diameter of paper roll: ≤30mm (Heatsensitive print paper)
- Printing speed: 5cm/sec. (when power is enough)
- Printing resolution: 203dpi (8dot/mm)
- Working power supply: 650mAh 7.2V rechargeable NiMH
- Recharging power supply: DC 12V/1A
- Dimensions: 90 x 76 x 36mm
- Weight: 220g (not including paper roll)
- Working temperature: -20 °C ～+50 °C
- Working humidity: 20%～85%
- Storage temperature: -30 °C ～+70 °C
- Storage humidity: 5%～95%
Standard accessories:
- Heatsensitive mini-printer: 1 pc.
- D type impact device: 1 pc.
- Small support ring: 1 pc.
- Leeb standardized block: 1 pc.
- Charger: 1 pc. (For both main machine and printer)
- Nylon brush: 1 pc.
|
Testing machinies 
