| Specification |
DC3000C |
DC3020C |
| Measurement mode |
Transmit –echo |
Standard measurement: For Normal thickness measurement.
-Minimum measurement: For curved surface
-Differential measurement: Displays the difference from the actual thickness
-measurement and a user entered reference value Average measurement : 2-9 point selectable
-Limit measurement: Min. Max setting and alarm |
√ |
√ |
| Echo-Echo |
The metal wall thickness is accurately and quickly measured in spite of surface
coating |
√ |
√ |
| Scan |
thickness value at 10 measurements per second while also
display actual thickness (Ideal for high temp. thickness readings) |
√ |
√ |
| Probe identify |
Auto |
√ |
√ |
| Probe zero |
Auto at power up and continuously during the measurement |
√ |
√ |
| Gain adjust |
Auto gain adjustment
Manual gain adjustment, low, standard and high |
√ |
√ |
| Memory |
5000 groups |
-- |
√ |
| Output |
USB to PC |
-- |
√ |
| Measuring Range |
0.65-400mm (0.025-15.748inch) (range depends on probe-material combination) |
√ |
√ |
| Resolution |
0.01mm (0.001 inch) for thickness up to 99.99mm
0.1mm ( 0.01 inch) for thickness above99.99mm |
√ |
√ |
| Information Display |
Measurement reading, Probe type, Velocity, measurement mode, measurement Symbol, Battery |
√ |
√ |
| Velocity range |
9 material velocities are stored for selection, or entre the new velocity manually (1000m/s-9999m/s) |
√ |
√ |
| Velocity measurement |
Simply calibrate when a material’s velocity is unknown |
√ |
√ |
| Display |
128 x 64 graphics LCD monochrome |
√ |
√ |
| Battery Type |
2 AAA Alkaline |
√ |
√ |
| Battery life |
Up to 50 Hours (without Backlight) |
√ |
√ |
| Shut off |
Auto, 2Min., 5Min., or never shut off delectable |
√ |
√ |
| Working Temperature |
-20°C-50°C |
√ |
√ |
| Unit |
mm/inch |
√ |
√ |
| Dimensions |
115mm x 64mm x 27mm |
√ |
√ |
| Weight |
220g |
√ |
√ |
Testers & detectors
